Our Product

Quick Enquiry

TYPE 1 / CLASS I

HS50-50i and HS50-50i LED are the lightning current arresters type 1 & class 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of both, the lightning current and the switching surge, which are generated in power supply systems entering the building.

View Details Write Review

TYPE 1 / CLASS I

HS100i is the lightning current arrester type 1 & class 1 according to EN 61643-11 and IEC 61643-1. These are recommended for use in the Lightning Zones Concept at the boundaries of LPZ 0 - 1 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of both, the lightning current and the switching surge, which are generated in power supply systems entering the building.

View Details Write Review

TYPE 1+2 / CLASS I+II

PIVM7-320/1+1 V series is a two-pole, metal oxide varistor lightning current and surge arrester, combined with gas discharge tube Type 1+2 & Class I+II according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305 ed.2), where they provide the equipotential bonding and discharge of both, the lightning current and the switching surge

View Details Write Review

TYPE 1+2 / CLASS I+II

PIVM7-320/3+1 Vseries is a four-pole, metal oxide varistor lightning current and surge arrester, combined with gas discharge tube Type 1+2 & Class I+II according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0 – 1 (according to IEC 1312-1 and EN 62305 ed.2), where they provide the equipotential bonding and discharge of both, the lightning current and the switching surge, which are generated in power supply systems entering the building

View Details Write Review

KO*G

KO* is an innovated coaxial high-frequency protection range designed for protection of equipment connected to an aerial system by means of coaxial cables. Special gas discharge tubes with maximum discharge current Imax (8/20) = 10kA (or 20 kA in case of KO-5GN) ensure a reliable protection of the receiving and transmitting systems even against a lightning stroke nearby.

View Details Write Review

KO*P

KO* is an innovated coaxial high-frequency protection range designed for protection of equipment connected to an aerial system by means of coaxial cables. Special gas discharge tubes with maximum discharge current Imax (8/20) = 10kA (or 20 kA in case of KO-5GN) ensure a reliable protection of the receiving and transmitting systems even against a lightning stroke nearby. Hakel company offers a wide range of coaxial protectors for various connector types and transmission power grades enabling usage in many applications. These coaxial protectors are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0A(B) -1 and higher according to EN 62305.

View Details Write Review

KO-9P

KO* is an innovated coaxial high-frequency protection range designed for protection of equipment connected to an aerial system by means of coaxial cables. Special gas discharge tubes with maximum discharge current Imax (8/20) = 10kA (or 20 kA in case of KO-5GN) ensure a reliable protection of the receiving and transmitting systems even against a lightning stroke nearby. Hakel company offers a wide range of coaxial protectors for various connector types and transmission power grades enabling usage in many applications. These coaxial protectors are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0A(B) -1 and higher according to EN 62305.

View Details Write Review

KO-10P

KO* is an innovated coaxial high-frequency protection range designed for protection of equipment connected to an aerial system by means of coaxial cables. Special gas discharge tubes with maximum discharge current Imax (8/20) = 10kA (or 20 kA in case of KO-5GN) ensure a reliable protection of the receiving and transmitting systems even against a lightning stroke nearby. Hakel company offers a wide range of coaxial protectors for various connector types and transmission power grades enabling usage in many applications. These coaxial protectors are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0A(B) -1 and higher according to EN 62305.

View Details Write Review

KO-5GN

KO* is an innovated coaxial high-frequency protection range designed for protection of equipment connected to an aerial system by means of coaxial cables. Special gas discharge tubes with maximum discharge current Imax (8/20) = 10kA (or 20 kA in case of KO-5GN) ensure a reliable protection of the receiving and transmitting systems even against a lightning stroke nearby. Hakel company offers a wide range of coaxial protectors for various connector types and transmission power grades enabling usage in many applications. These coaxial protectors are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0A(B) -1 and higher according to EN 62305.

View Details Write Review

KO-6GN

KO* is an innovated coaxial high-frequency protection range designed for protection of equipment connected to an aerial system by means of coaxial cables. Special gas discharge tubes with maximum discharge current Imax (8/20) = 10kA (or 20 kA in case of KO-5GN) ensure a reliable protection of the receiving and transmitting systems even against a lightning stroke nearby. Hakel company offers a wide range of coaxial protectors for various connector types and transmission power grades enabling usage in many applications. These coaxial protectors are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 0A(B) -1 and higher according to EN 62305.

View Details Write Review

TYPE 2 / CLASS II

PIIIM-320/1+1 V series is a two-pole, metal oxide varistor surge arrester combined with gas discharge tube, Type 2 & Class II according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of the switching overvoltage, which is generated in power supply systems entering the building.

View Details Write Review

TYPE 2 / CLASS II

PIIIM-320/3+1 V series is a four-pole, metal oxide varistor surge arrester combined with gas discharge tube, Type 2 & Class II according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of the switching overvoltage, which is generated in power supply systems entering the building. The main use of PIIIM-320/3+1 V series arrester is in all kinds of industry, residential and administration buildings.

View Details Write Review

TYPE 2 / CLASS II

PIIIM-320/3+0 V series is a three-pole, metal oxide varistor surge arrester Type 2 & Class II according to EN 61643-11 and IEC 61643-1. These arresters are recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 (according to IEC 1312-1 and EN 62305), where they provide the equipotential bonding and discharge of the switching overvoltage, which is generated in power supply systems entering the building. The main use of PIIIM-320/3+0 Vseries arrester is in all kinds of industry, residential and administration buildings.

View Details Write Review

TYPE 3 / CLASS III / DC

P-k16*DC is designed for protection of electronic appliances in L.V. power supply DC systems against the impulse surge effects. They are constructed for mounting on DIN rail 36mm for rated load currents 16A according to IEC 61643-1, EN 61643-11 and EN 62305 standards (arrester class III - 3rd stage protection). Right function of the in-built protective elements, MOV varistors, is signalized by green light on the front panel of the equipment.

View Details Write Review

TYPE 3 / CLASS III

P-k16*AC is designed for protection of electronic appliances in L.V. power supply AC systems against the impulse surge effects. They are constructed for mounting on DIN rail 36mm for rated load currents 16A according to IEC 61643-1, EN 61643-11 and EN 62305 standards (arrester class III - 3rd stage protection). Right function of the in-built protective elements, MOV varistors, is signalized by green light on the front panel of the equipment.

View Details Write Review

TYPE 3 / CLASS III

ZS-1I, ZS-1P are the surge arresters type 3 & Class III according to EN 61643-11 and IEC 61643-1 and IEC 61643-1 designed for installation into electrical installation systems, e.g.: cable ducts and flush-mounted sockets as an additional protection. These devices are suitable supplements of socket distribution which are protected by PI-k protector. The right function of ZS-1I type is indicated by green LED diode. When the indicator is dark, the device must be replaced or technically checked. ZS-1P contains an acoustic fault indicator (buzzer).

View Details Write Review

TYPE 3 / CLASS III

PI-k8 is a single-phase surge arrester type 3 & Class III, which is equipped with high-frequency filter, according to EN 61643-11 and IEC 61643-1. It is intended for use in the power supply lines, which are operated as TN-S system. The arrester PI-k8 is constructed for mounting on DIN rail 35mm and designed for protection of single-phase electronic appliances in L.V. power supply systems against the transient surge and high-frequency disturbance.

View Details Write Review

TYPE 2 + 3 / CLASS II+III

ZS-1 275 DS RS and ZS-1 275 DS DI are surge arresters Type 2+3 & Class II + III (TYPE 3 protects the device only to 5m lead) according to EN 61643-11 and EN 62305 designed for LED lighting protection for installations largely e.g. in tunnels, properties and premises, street lights etc.

View Details Write Review

HT-NET PoE 6cat X series

These surge protection devices intended for computer networks are specially designed for securing a faultless data transfer within computer networks category 6. They protect input electronic circuits of network cards against damage caused by surge effects in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2 according to EN 62305.

View Details Write Review

HT-TEL X series

Hakel Transmition-TEL is designed to protect telecommunications equipment. The casing of this protector is made out of light alloy, which ensures high mechanical and thermal resistance. Imax = 2 kA. It is recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2-3 according to EN 62305.

View Details Write Review

HT-CCTV 6 X series

Hakel Transmition-CCTV is designed to protect video transmission equipment, which process the transferred video signal. The casing of this protector is made out of light alloy, which ensures high mechanical and thermal resistance. Imax= 5 kA. It is recommended for use in the Lightning Protection Zones Concept at the boundaries of LPZ 1-2-3 according to EN 62305.

View Details Write Review

TYPE 3 / CLASS III

PI-3k is a three-phase surge arrester type 3 & Class III, which is equipped with high-frequency filter, according to EN 61643-11 and IEC 61643-1. It is intended for use in the power supply lines, which are operated as TN-S system. PI-3k120 is designed for protection of three-phase electronic appliances in L.V. power supply systems against the transient overvoltage and high-frequency disturbance.

View Details Write Review

HGS100

HGS100 and HGS100 EB are a separating high power gas discharge tubes intended for equipotential bonding of an installation parts of buildings, which are not interconnected. In case of origin of p.d. (potential diference) between those parts, the high power gas discharge tube ignites and interconnects both parts for a transient time (typical value of internal resistance at startup of HGS100 is 0,001 ÷ 0,002 ?)

View Details Write Review

HGS100 Ex

HGS100 Ex - Separating high power gas discharge tube HGS100 Ex for use in explosion hazards areas. It is intended for equipotential bonding of the installation parts of buildings or technological entities which are not interconnected operationaly. In case of p.d. (potential difference) origin between those parts, the high power gas discharge tube ignites and interconnects both parts for a transient time (typical value of internal resistance at startup of HGS100 Ex is 0,001÷ 0,002?).

View Details Write Review

HGS100 EB

HGS100 and HGS100 EB are a separating high power gas discharge tubes intended for equipotential bonding of an installation parts of buildings, which are not interconnected. In case of origin of p.d. (potential diference) between those parts, the high power gas discharge tube ignites and interconnects both parts for a transient time (typical value of internal resistance at startup of HGS100 is 0,001 ÷ 0,002 ?)

View Details Write Review

JK Chemrode

The core of “JK” brand earthing electrode is termed as “CHEMRODE” which consists of the various constructions & designs listed below.

View Details Write Review

Copper Bonded Rod

Copper Rod

JK CHEMRODE are of copper rod earth rods are of a high quality which comply by the most demanding regulations, for efficient and long lasting earthings. Copper rods are made by pure electrolytic copper (99.9%). The copper rods are ideally suitable where soil conditions are very corrosive, such as soil with high salt and moisture content. These rods add a lot of strength & longevity to electrical grounding system.

View Details Write Review

Copper Pipe Electrode

JK CHEMRODE consists of a primary earthing electrode (outer pipe) of 99.9% pure Copper pipe. The hollow space of the electrode is duly filled with a highly conductive and noncorrosive compound which safeguards the secondary electrode getting corrode over a long period of time under the soil. Also the compound ensures the easy distribution of leakage/fault current lands on the electrode.

View Details Write Review

Copper Bonded Pipe Electrode

JK CHEMRODE consists of a primary earthing electrode of coper bonded M.S. Pipe. Copper bonded pipe electrodes are made by molecularly bonding pure electrolytic copper (99.9%) with the thickness/bonding of ranging from 50 to 250 microns. Low carbon & high tensile steel pipe is selected to ensure a perfect and even bonding between the steel and copper.

View Details Write Review

RESLOW Grounding Minerals

JK EARTH ENHANCE COMPOUND has introduced an illustrious compound “RESLOW” grounding minerals which is used around the earth electrodes inorder to reduce the resistance between soil & the electrode. RESLOW grounding minerals is a combination of graphite, natural earth minerals, etc which is of hygroscopic property to retain the moisture for a long time. RESLOW grounding minerals is a combination of totally corrosion free and highly conductive & non-corrosive minerals.

View Details Write Review

JK Activer+ Grounding Minerals

JK Activer+ Earth enhancement material is a superior conductive material that improves earthing effectiveness, especially in areas of poor conductivity (rocky ground, areas of moisture variation, sandy soils etc.).

View Details Write Review

Grounding of Solar PV System

When installing a solar PV system, it is extremely important all the equipment is grounded correctly. Improper earthing can be devastating, especially in an area that experiences lightning on a regular basis. Even if you seldom have electrical storms, all it takes is one lightning strike or a single lose wire and all the equipment can be destroyed. Worse yet, it can start a fire and cause even more damage to your home.

View Details Write Review

Air Terminal Single Spike

Air Terminal Single Spike

View Details Write Review

Air Terminal Five Spike

Air Terminal Five Spike

View Details Write Review

Air Terminal Base

Ridge Saddle

Cross Connector For Tape

Cross Connector For Tape

View Details Write Review

Cross Connector For Round Conductor

Cross Connector For Round Conductor

View Details Write Review

Parallel Connector For Round Conductor

Parallel Connector For Round Conductor

View Details Write Review

T Connector For Round Conductor

T Connector For Round Conductor

View Details Write Review

Tape Saddle

Round Conductor Saddle

Round Conductor Saddle

View Details Write Review

Straight Connector For Tape

Straight Connector For Tape

View Details Write Review

Coupler for Tape & Round Conductor

Coupler for Tape & Round Conductor

View Details Write Review

Clamp For Earthing Rod

Clamp For Earthing Rod

View Details Write Review

Clamp For Connecting Earth Rod & Tape

Clamp For Connecting Earth Rod & Tape

View Details Write Review

Clamp For Connecting Earth Rod & Round conductor

Clamp For Connecting Earth Rod & Round conductor

View Details Write Review

Clamp For Connecting Earth Rod & Round conductor in Parallel

Clamp For Connecting Earth Rod & Round conductor in Parallel

View Details Write Review

Earth Point

Expansion Piece

Connector For Expansion Piece

Connector For Expansion Piece

View Details Write Review

Roof Conductor Holder for Roof

Roof Conductor Holder for Roof

View Details Write Review

Aluminium Round Conductor

Aluminium Round Conductor

View Details Write Review

Test Link Box

Braided Copper Tape

LPI’s Stormaster ESE

The LPI Stormaster (Early Streamer Emission) range of terminals provides a safe and efficient system for the protection of your facility from direct lightning strikes.

View Details Write Review

Lightning Strike Recorder (LSR1)

LPI® Lightning Strike Recorder (LSR1) is a lightning strike counter. The LSR1 is simply mounted at any location along the downconductor route. Its purpose is to record the number of strikes captured and conveyed by the downconductor.

View Details Write Review

Earth Rods

Copper bonded (threaded or unthreaded), Solid Copper or Stainless Steel.

View Details Write Review

LPI RESLO

The requirement for a low resistance is extremely important with the installation of any earthing system.

View Details Write Review

LPI GRIP

The requirement for a low resistance is extremely important with the installation of any earthing system.

View Details Write Review

Polyplastic Earth Pit Chamber

Polyplastic Earth Pit Chamber

View Details Write Review

PIVM12.5-275/1+1 | PIVM12.5-275 DS/1+1

PIVM12.5-275/1+1 Vseries is a two-pole, metal oxid varistor lightning and surge arrester, combined with gas discharge tube Type 1+2 according to EN 61643-11 and IEC 61643-11.

View Details Write Review

PIVM PV600 | PIVM PV600 DS

PIVM PV is a lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-11 and UTE C 61-740-51.

View Details Write Review

SPC25/3+1 | SPC25 DS/3+1

SPC25/3+1 is a metal oxid varistor lightning and surge arrester, combined with gas discharge tube Type 1+2 according to EN 61643-11 and IEC 61643-11.

View Details Write Review

PIVM PV800 | PIVM PV800 DS

PIVM PV are the lightning and surge arresters type 1+2 according to EN 61643-11 and IEC 61643-11 and UTE C 61-740-51.

View Details Write Review

DTE

DTE is a complex range of surge protection devices designed for protection of data, communication, measuring and control lines against surge effects.

View Details Write Review

DTB 4/100M 5cat

These surge protection devices intended for computer networks are specially designed for securing a faultless data transfer within computer networks category 5.

View Details Write Review

SPC12.5/3+1 | SPC12.5 DS/3+1

SPC12.5/3+1 is a metal oxid varistor lightning and surge arrester, combined with gas discharge tube Type 1+2 according to EN 61643-11 and IEC 61643-11.

View Details Write Review

SPC25/3+1 | SPC25 DS/3+1

Double terminals of the device allow the “V” connection at the maximum current-carrying capacity of 125A.

View Details Write Review

SPC PV 600 | SPC PV 600 DS

SPC PV is a lightning and surge arrester type 1+2 according to EN 61643-11 and EN 50539.

View Details Write Review

DTE

DTE is a complex range of surge protection devices designed for protection of data, communication, measuring and control lines against surge effects.

View Details Write Review

SPC PV 600, SPC PV 800, SPC PV 1000 | SPC PV 600 DS, SPC PV 800 DS, SPC PV 1000 DS

SPC PV is a lightning and surge arrester type 1+2 according to EN 61643-11 and EN 50539.

View Details Write Review

PIVM PV 600 Vseries | PIVM PV 600 DS Vseries

PIVM PV is a lightning and surge arrester type 1+2 according to EN 61643-11 and IEC 61643-11 and UTE C 61-740-51.

View Details Write Review

PIVM PV 800 Vseries , PIVM PV 1000 Vseries | PIVM PV 800 DS Vseries , PIVM PV 1000 DS Vseries

PIVM PV are the lightning and surge arresters type 1+2 according to EN 61643-11 and IEC 61643-11 and UTE C 61-740-51.

View Details Write Review

PIIIM PV 600 Vseries, PIIIM PV 800 Vseries, PIIIM PV 1000 Vseries | PIIIM PV 600 DS Vseries, PIIIM PV 800 DS Vseries, PIIIM PV 1000 DS Vseries

The marking M specifies a type of construction with removable module.

View Details Write Review

DTE */*

DTE is a complex range of surge protection devices designed for protection of data, communication, measuring and control lines against surge effects.

View Details Write Review

DTB */*/*

DTB, DTB-R is a complex range of surge protection devices designed for protection of data, communication, measuring and control lines against surge effects.

View Details Write Review

HT-DATA 1/* Xseries | HT-NV 1/*/0.5 Xseries

Hakel Transmition - Data is designed to protect transmission of information signals and Hakel Transmition-NV to protect links of power supply lines.

View Details Write Review

HT-NET PoE 6cat Xseries

These surge protection devices intended for computer networks are specially designed for securing a faultless data transfer within computer networks category 6.

View Details Write Review

HUF 003 - VOLTAGE & FREQUENCY PROTECTOR

This Voltage & Frequency Protector is recommended for use in AC parts of photovoltaic systems or other types of AC electrical installations.

View Details Write Review

PV Surge Arrester TYPE 2 / CLASS II

SPUM PV is surge arrester Type 2 / Class II according to EN 61643-11. Complete device consists of a base part and pluggable modules.

View Details Write Review

Guardian System 5

Stormaster ESE Terminals

Stormaster ESE Terminals

View Details Write Review

Guardian Plus

Lightning Warning System

Lightning Warning System

View Details Write Review

Accessories for Terminals

Accessories for Terminals

View Details Write Review

Conventional Lightning Protection

Conventional Lightning Protection

View Details Write Review

EPR Safety Mat

Earth Rods and Accessories

Earth Rods and Accessories

View Details Write Review

Earth Pits

Equipotential Clamps

Equipotential Clamps

View Details Write Review

Earth Enhancing Compounds

Earth Enhancing Compounds

View Details Write Review

Chemical Rods

CONTACT

For any kind of query, contact us with the details below.

  • Mr. Anurag Gupta
  • +91 - 9650044992
  • sales4@alliedpowersolutions.com
  • Allied Power Solutions
    T- 4,5 & 6 , Third Floor Pankaj Plaza – 3, I.P Extn., Patparganj
    New Delhi - Delhi (India.) - 110092

Leave a message

Please fill in your info and we will contact you soon.